Most households in the UK will have a broadband connection and a lot of those houses will also have experienced connection or speed issues.

But what if there was a way to connect to the internet and benefit from a direct connection with much faster speeds? Enter Li-Fi. 

Li-Fi stands for Light Fidelity and is a Visible Light Communications (VLC) system which runs wireless communications that travel at very high speeds.

With Li-Fi, your light blub is essentially your router. It uses common household LED light bulbs to enable data transfer, boasting speeds of up to 224 gigabits per second.

The term Li-Fi was coined by University of Edinburgh Professor Harald Haas during a TED Talk in 2011. Haas envisioned light bulbs that could act as wireless routers.

Subsequently, in 2012 after four years of research, Haas set up company pureLiFi with the aim 'to be the world leader in Visible Light Communications technology'.

Read next: Eight brilliant uses of Li-Fi

How does Li-Fi work?

Li-Fi and Wi-Fi are quite similar as both transmit data electromagnetically. However, Wi-Fi uses radio waves, while Li-Fi runs on visible light waves.

As we now know, Li-Fi is a Visible Light Communications (VLC) system. This means that it accommodates a photo-detector to receive light signals and a signal processing element to convert the data into 'streamable' content.

An LED light bulb is a semiconductor light source meaning that the constant current of electricity supplied to an LED light bulb can be dipped and dimmed, up and down at extremely high speeds, without being visible to the human eye.

For example, data is fed into an LED light bulb (with signal processing technology), it then sends data (embedded in its beam) at rapid speeds to the photo-detector (photodiode).

The tiny changes in the rapid dimming of LED bulbs is then converted by the 'receiver' into electrical signal.

The signal is then converted back into a binary data stream that we would recognise as web, video and audio applications that run on internet-enabled devices.

You might also like: What is microservices?

Li-Fi vs Wi-Fi

While some may think that Li-Fi with its 224 gigabits per second leaves Wi-Fi in the dust, Li-Fi's exclusive use of visible light could halt a mass uptake. 

Li-Fi signals cannot pass through walls, so in order to enjoy full connectivity, capable LED bulbs will need to be placed throughout the home. Not to mention, Li-Fi requires the light bulb is on at all times to provide connectivity, meaning that the lights will need to be on during the day.

Additionally, where there is a lack of light bulbs, there is a lack of Li-Fi internet so Li-Fi does take a hit when it comes to public Wi-Fi networks.

However, using Li-Fi instead of Wi-Fi, you'll negate lots of security problems associated with shared and often overloaded broadband networks. 

It will also be advantageous in areas where radio frequency waves do not reach. 

It was announced in 2016 that an extension of standard Wi-Fi was to be launched called Wi-Fi HaLow.

This new project claims to double the range of connectivity while using less power. Due to this, Wi-Fi HaLow is reportedly perfect for battery-powered devices such as smartwatches and smartphones, and also lends itself to internet of things devices such as sensors and smart applications. 

Due to its impressive speeds, Li-Fi could make a huge impact on the internet of things too, with data transferred at much higher levels with even more devices able to connect to one another.

Read next: What is the internet of things?

What's more, due to its shorter range, Li-Fi is more secure than Wi-Fi and it's reported that embedded light beams reflected off a surface could still achieve 70 megabits per second.

Who is investing in Li-Fi?

In November 2014, Li-Fi pioneers pureLiFi joined forces with French lighting company Lucibel to launch Li-Fi-enabled products.

PureLiFi has a few products on the market: a Li-Fi ceiling unit to connect to an LED light fixture and Li-Fi-XC which is for connecting to a device via USB or as part of the hardware, providing about 43Mbps from each LiFi-enabled LED light. 

Plus, with faster connectivity and data transmission it's an interesting space for businesses. The integration of internet of things devices and Li-Fi will provide a wealth of opportunities for retailers and other businesses alike. For example, shop owners could transmit data to multiple customers' phones quickly, securely and remotely. 

Well-known lighting brand Philips has also jumped to invest in Li-Fi, now offering full and integrated Li-Fi services including LED products and Li-Fi. 

In 2016, it was reported that Li-Fi was being tested in Dubai, by UAE-based telecommunications provider Du and Zero1. Du claimed to have successfully provided internet, audio and video streaming over a Li-Fi connection.

In addition, reports suggested that Apple may build future iPhones with Li-Fi capabilities. A Twitter user found that within its iOS 9.1 code there were references to Li-Fi written as 'LiFiCapability' hinting that Apple may integrate Li-Fi with iPhones in the future. 

Founded by Maite Brandt-Pearce and Mohammad Noshad in 2013, Charlottesville-based Li-Fi firm VLNComm has received backing from the US Department of Energy and the National Science Foundation. It has also released three Li-Fi products: a desk light, USB stick and LED panel.

More recently, Icade, a French real estate investment firm has opted to use Li-Fi to connect its employees to the internet. 

So, whether or not Li-Fi will live up to its hype is yet to be decided. Watch this space...