The Ender 3 is a fantastic 3D printer for beginners and those on a budget, with a compact and sturdy build, large volume and decent print quality. It stands out for its smooth motion, large wheels that allow for easy levelling adjustments and ability to resume from a power outage, though it must be said there have been some concerns with quality control on earlier models.
Price comparison from over 24,000 stores worldwide
3D printing still has that wow factor among home tech consumers – futuristic and seemingly super-techy, yet it’s increasingly available within their reach. The Ender 3 from Creality 3D is among one of the better budget 3D printers, an FDM (Fused Deposition Modelling) model with a generous build volume and surprisingly decent print quality under £200.
If you order from
Amazon you’ll pay £229/US$239, but it is possible to get the Ender 3 significantly cheaper direct from China.
GearBest supplied our review sample, and it is currently running a special deal that will net you the Ender 3 for just £138.42 – just enter GBEnder3 as the coupon code. Do bear in mind that you may have to pay import duty upon arrival to the UK, however, which is charged at 20% of the value on the shipping paperwork.
One reason you might choose to pay more for the Ender 3 and purchase it from Amazon is that build quality has been an issue with some of the earlier units, and sending back a faulty printer will be easier if it doesn’t have to go all the way to China.
That said, we had zero issues here, and our machine went together without issue. It’s actually very strong and rigid thanks to its all metal build, and a combination of V-Slot aluminium extrusions and wheels make for smooth action that reduces noise and ensures good print quality. Creality claims it tests all models for 24 hours before delivery and offers a one-year warranty, too.
We don’t mean to put you off, because the Ender 3 truly is a fantastic budget 3D printer. Critics who have been messing around with 3D printing much longer than we have put it right up there with the best budget models, and some say it’s replaced machines costing closer to £1000.
You should also factor in the cost of filament, and a 1kg reel of 1.75mm PLA will set you back around £15-£20, but you can pay more for better-quality material. For most of our tests we used
CCTREE filament (£18.66 for 1kg) which was provided for us by GearBest. A 1kg reel at this size is around 335m in length.
Be warned that this is a DIY kit, which means you will need to assemble some parts of the printer before you can begin. The base is pre-built, but you’ll need to hook up the frame, power supply and reassuringly thick cables, control panel and various components before you can begin.
That might scare off some beginners, but it shouldn’t – there are plenty of video guides on YouTube to help you set it up. The Ender 3 is also supplied with instructions, though they’re not brilliant so we recommend using the videos to supplement this.
It’s not quite the 10 minutes quoted by the manufacturer, but all in all assembly will likely take a novice user around an hour, two at most. Pleasingly you’ll find several spare parts (all clearly labelled) and all the necessary tools in the box, along with some extras such as a metal spatula, pair of cutters and a nozzle cleaner.
Once assembled the Ender 3 will require some testing to ensure you’ve got everything just right. It takes around five minutes to heat up before you can start. There’s a test dog G-Code on the microSD card supplied with the printer, but not enough sample filament to print the whole thing. It took us a while to realise the nozzle was happily moving side to side but not up and down, but this was an easy fix when we realised we’d simply over-tightened the screws on the extruder rod.
You’ll need to manually level the Ender 3’s print bed using the four oversized wheels found on the underside of each corner. These make for relatively easy adjustments, provided you’ve positioned the printer somewhere you can access each wheel, but you’ll need to do so more frequently than you’d probably like. It’s too easy to knock it out of line when prising off prints from the bed.
That’s because PLA sticks surprisingly well to the Ender 3, which prevents you getting a load of messed up prints, but it does make life more difficult once your print is complete. After a few test runs we resorted to applying
ScotchBlue Painter’s Tape to the bed, which we needed to wrap right under and ensure it was stuck down tight to prevent it peeling up mid-print. This is not a criticism in any sense: getting prints to stick to the bed is a common problem in 3D printing.
Levelling is reasonably easy, though: you just stick a sheet of A4 paper on the bed and turn each wheel so the nozzle lightly scratches the paper.
Getting started with 3D printing
You’ll notice that the tone of this review is very different to what you might have read on hobbyist sites, and there’s a reason for this: Tech Advisor speaks to general tech consumers. The whole point is that the Ender 3 is affordable and accessible enough to be used by anyone, at home, to start creating amazing 3D prints. It’s not one of those gadgets reserved purely for those with the know-how.
Beginners should know that you don’t need to know how to create 3D models to get started with 3D printing at home. Sites such as
Thingiverse have huge databases of 3D models that you can download for free, and many of them can be customised without breaking the terms of the Creative Commons licences under which they are provided.
TinkerCad, a free online service, to personalise some of those prints with text, and found it incredibly straightforward. 3D printing is only as complex as you make it.
For our first model we chose a
melted Darth Vader mask from Thingiverse, then scaled it down in Cura and increased the layer height in our impatience. We’ve since experimented with higher-quality prints, and in general print quality from the Ender 3 is very good, especially at this price.
Have a look at the
Star Wars coaster set we printed (also from Thingiverse) – it’s incredible what is possible for even novice users.
Typically speaking, 3D printing at the highest quality or for large jobs can be a very slow process – and here those print jobs really can be rather large, thanks to a 220x220x250mm bed. But the Ender 3 is pretty swift, heating up fast and reaching a maximum print speed of 180mm/sec. It’s also reassuring to know that it is able to pause and resume prints even after a power cut, which is a luxury usually reserved for more expensive models.
Despite its generous build volume the Ender 3 is not oversized, and its one-piece structure allows it to be fairly compact and very sturdy. It stands 46.5cm high, and 44cm wide, and weighs just under 8kg.
The microSD card used to load models to the printer is in a rather fiddly location in relation to the position of the print bed, and you’ll likely need to use a USB adaptor (supplied) to copy models from your PC or laptop on to the card. Beside the card slot there’s also a Mini-USB port that allows you to operate the Ender 3 online from a computer, but we stuck to the microSD card for our tests.
The menu system is really easy to navigate, with a single dial that you use to scroll through menus and click to select. During printing the information screen displays various information such as the temperature of the nozzle and heat bed, and the printing coordinates. You can also see here a progress bar and the time taken so far, but you should get a good idea from Cura both how long it will take to print and how many metres of filament it will require.
Naturally it’s easier to ensure you have enough plastic before you begin, but changing the plastic is very simple. Our only criticism here is that while you can heat up the new plastic you cannot force the nozzle to extrude it.
Creality 3D Ender 3: Specs
FDM 3D printer
requires 1.75mm PLA/TPU/ABS filament
accepts STL/OBJ/G-Code files
220x220x250mm print size
works online via Mini-USB port or offline with microSD (8GB card provided)